Still EXP 14, Original Instructions Manual

Page: 41 / 144

Overview
3
Instruments and controls
7
OM2279
A
B
7
2
3
5
6
3
2
8
1
1
1
9
10
4
1
Tiller controls
1 — Tiller head handle
2 and 3 — Traction control throttle
4 — Fork lowering button
5 — Fork lifting button
6 — Horn button
7 — Anti-crush button
8 — Slow speed button (optional — Creep
Speed)
9 — Straddle lifting button (optional)
10 — Straddle lowering button (optional)
NOTE
The following controls are active with the tiller
in the "working position".
Tiller head handle (1)
• Areas designed for holding the tiller head
during use.
Traction control throttle (2 – 3)
• When the throttle (2 or 3) is turned in
direction (A), the truck starts moving in the
direction of the forks.
• When the throttle (2 or 3) is turned in
direction (B), the truck starts moving in the
direction of the operator.
• The truck speed increases or decreases
according to the angular position of the
throttle.
• Releasing the throttle causes braking and
subsequently the stopping of the truck.
Fork lowering button (4)
• Press the button (4) to lower the forks.
• Fork movement can be stopped at any time
by releasing the button (4). The forks will
stop in the position attained.
• The fork lowering button (4) is active only
when the tiller is angled to the working
position.
NOTE
•
The speed of the forks is proportional to how
hard the button (4) is pressed
•
When the forks are fully lowered, a reduc-
tion in the fork lowering speed is automa-
45758043402 [EN] 35