Still EXP 14, Original Instructions Manual

Page: 51 / 144

Overview
3
Side protection
Side protection
Description
The side protection has been designed to
protect the operator when the truck is used in
ride on mode.
There are two positions:
– Position "A" = side protection closed.
Position used when the operator is using
the truck in pedestrian mode (operated from
the "ground") with the platform closed.
The truck also works with the side protec-
tion closed (Position "A") and also with the
operator on board the truck. In this case the
maximum travel speed of the truck will be au-
tomatically limited for safety reasons.
– Position "B" = side protection open. Position
used with the operator on board the truck,
standing on the platform.
Opening and closing the side protection
– To open, pull the two operator side protec-
tive guards outwards.
– To close, push the two operator side
protective guards inwards.
Adjusting the height of the side protection
– To adjust the height of the side protective
guards according to the height of the
operator, open the side protective guards,
then manually pull the side protective
guards upwards (three positions). To close
the side protective guards, push them down
until they reach the original, lowest position.
45758043402 [EN] 45