Overview
3
Markings
Capacity plate
– The identification plate indicates the follow-
ing data:
• (1) CDG = distance "C" from the centre of
gravity of the load on the forks to the fork
carriage (in mm)
• (2) h = lift height of the forks from the ground
(in mm)
• (3) Maximum permissible loads "Q" (in kg)
WARNING
The illustrations are only examples.
Only the values stated on your truck’s plate should
be taken into consideration.
(*) Lifting height (HS) refers to h3 (fork lifting)
+ S (fork height).
h3
S
HS
C
C
1990
–
DANGER
The values indicated on the capacity plate refer to
compact and homogeneous loads and must not
be exceeded - otherwise the stability of the truck
and the load-bearing capacity of the structures
may be compromised. The distances C of the load
centre of gravity and the lifting height of the forks
HS determine the maximum load capacity.
DANGER
Risk of accident when forks are changed:
If the forks are changed and a different type of
forks to the original forks is fitted, the residual load
capacity changes.
When forks are changed, a new residual capacity
plate must be affixed.
If a truck is supplied without forks, the residual
capacity plate for standard forks is affixed (see
chapter 6 "Technical Data").
45758043402 [EN]
53
Summary of Contents for EXP 14
