Still EXP 14 Original Instructions Manual Download

Page: 100 / 144

Use

Charging the battery

• gel battery with a capacity below 210 Ah,
• gel battery with a capacity greater than 210

Ah.

CAUTION

The charger is supplied in the NEUTRAL position.

Recharging the battery using the

on-board battery charger (optional)

CAUTION

Charge the battery with the engine switched off and

the start key removed.

DANGER

The battery must be charged in rooms that comply

with applicable regulations. Refer to the battery

and battery charger manual for the charging pro-

cedures, level checks etc., checking the type of

battery (gel, lead etc.) and the voltage and current

delivered. Excessive currents can damage batte-

ries and cause dangerous situations. As regards

safety precautions, follow the instructions given in

the battery manual and those included in the "Sa-

fety Guidelines "of this manual.

DANGER

If the truck is ﬁtted with an on-board battery charger,

it is strictly prohibited to connect the battery to an

external battery charger.

CAUTION

Make sure that the mains supply voltage complies

with the battery charger’s operating voltage.

DANGER

The electrical system must comply with the current

national regulations.

45758043402 [EN]

Summary of Contents for EXP 14

















































































































































Search results

Summary of Contents for EXP 14

Reviews:

Related manuals for EXP 14

Brands by name

Popular brands

Still EXP 14, Original Instructions Manual

Search results

Summary of Contents for EXP 14

Reviews:

Related manuals for EXP 14

Brands by name

Popular brands