Still EXP 14 Original Instructions Manual Download

Page: 77 / 144

Use

Operator position

Ride on mode driving position

The operator should drive the truck using the

driving and lifting controls located on the tiller

head.
In this conﬁguration:
• The platform must be fully open
• With the side protection closed, the max-

imum speed of travel is limited for safety

reasons.

• With the side protection open, the maximum

authorised speed is slightly higher, as

the operator is driving in a safer situation,

restrained by the side protection.

CAUTION

The truck may be operated in ride on mode with the

side protection either open or closed.

CAUTION

In ride on mode, opening the combi tiller is prohibi-

ted.
If the clasp to close the tiller is not shut properly, the

truck will not start.

DANGER

Risk of falling from the platform.
Position yourself correctly on the platform between

the two operator side protection panels.
Turn corners at low speed.
While driving, ﬁrmly grip the handle on the tiller

head with your hands.

DANGER

Do not sit down and do not climb on the side protec-

tion panels

45758043402 [EN]

Summary of Contents for EXP 14

















































































































































Search results

Summary of Contents for EXP 14

Reviews:

Related manuals for EXP 14

Brands by name

Popular brands

Still EXP 14, Original Instructions Manual

Search results

Summary of Contents for EXP 14

Reviews:

Related manuals for EXP 14

Brands by name

Popular brands