Still EXP 14 Original Instructions Manual Download

Page: 109 / 144

Maintenance

Maintenance as required

• Lift the battery using a hoist suitably sized

for the weight of the battery.

• Change the battery and reﬁt it by following

the above steps in reverse order.

CAUTION

To decide which type of battery to use, check the

battery characteristics provided in the "TECHNI-

CAL DATA" chapter.

DANGER

Use a crane with a suitable lifting capacity for

the weight of the battery. Lifting operations must

be performed by qualiﬁed personnel. DO NOT

stand within the crane’s radius of action or near

the truck. Do not stand in the danger area beneath

suspended loads. Use NON METALLIC slings.

Make sure that the lifting capacity of the slings

is suitable for the weight of the battery. The slings

must be pulled vertically. To prevent short circuits, it

is recommended that batteries with polar terminals

or unprotected connections be covered with a

rubber mat.

Additional precautions

OM2309

– For trucks equipped with Duplex mast

1844/1415 and Simplex mast 1844/1415,

the protective guard (1) must be removed

before inserting and extracting the battery

from the top (2).

45758043402 [EN]

103

Summary of Contents for EXP 14

















































































































































Search results

Summary of Contents for EXP 14

Reviews:

Related manuals for EXP 14

Brands by name

Popular brands

Still EXP 14, Original Instructions Manual

Search results

Summary of Contents for EXP 14

Reviews:

Related manuals for EXP 14

Brands by name

Popular brands