Still EXP 14, Original Instructions Manual

Page: 81 / 144

Use
4
Use of the truck
OM2283
3
4
4
Using the truck with the "Tiller always
active — Creep Speed" function
(optional)
The "tiller always active" function can be
enabled when operating the truck in confined
spaces.
This function allows the truck to be operated
with the tiller in any position. Unlike the stan-
dard version, by following the instructions be-
low the truck functions (travel and lifting/low-
ering of forks) are also active with the tiller in
the vertical position.
To enable truck lifting with the tiller in the
vertical position:
• Press and hold the button (3)
• Then press the fork lifting button
• Release the button (3) to disable this
function.
To enable travel with the tiller in the vertical
position:
• Press and hold the button (3)
• Then turn the throttle (4) in the desired
direction
• Creep speed of the truck (1.5 km/h) is
enabled During creep speed with the tiller
in the vertical position and the button (3)
pressed, if the operator tilts the tiller into
the working position (see ⇒ Chapter "Tiller
positions", P. 3-38), the speed of travel of
the truck is increased up to a maximum of
6 km/h
• Release the button (3) to disable this
function.
NOTE
If the activation sequence is accidentally
reversed, i.e. with the tiller in the vertical
position, the throttle (4) is turned first and then
the button (3) is pressed:
• The truck will move in creep speed as
expected in the direction of the forks
• Travel in the direction of the operator is not
enabled.
45758043402 [EN] 75