Still ECH 15, Original Instructions Manual

Page: 64 / 104

Picking up and storing goods
CAUTION
Before picking up a load, the operator must ensure
that it has been correctly stacked.
The weight must not exceed the truck's rated load
capacity.
Do not place long loads in a lateral direction across
the fork.
Stay away from the area beneath the raised forks.
Loads that are not positioned and secured in
accordance with the regulations pose an acci-
dent risk.
●
Instruct all personnel to vacate the hazard
area of the truck. If any person is located in
the hazard area, stop the truck immediately.
●
Only transport loads that have been posi-
tioned and secured in accordance with reg-
ulations. Adopt appropriate protective
measures if the load is at risk of tipping over
or falling during transport.
●
Do not transport goods using damaged
equipment (such as the truck, pallets etc.).
●
Never go under the raised load component.
●
Personnel are prohibited from entering the
load component.
●
Do not use the truck to lift personnel.
●
Try to move the fork until it is completely
under the goods.
Lifting
Push the lifting button (3) until the desired lift
height is reached, then release the button.
CAUTION
To avoid shortening the service life of the cylinder,
try not to raise the fork to maximum height when lift-
ing.
Lowering
Press and hold down the lowering button (4)
until the load component is at the very bottom,
then release the lowering button.

Operation
4
Picking up and storing goods
56 5001 801 1555 EN - 12/2020