Still ECH 15 Original Instructions Manual Download

Page: 66 / 104

Hoisting

DANGER

Danger to life!
Personnel must not stand below or near the truck

when the pallet truck is being lifted.

WARNING

Risk of serious injury and/or major equipment dam-

age.
Use lifting hooks and a hoist with adequate lifting ca-

pacity. Protect all components that come into contact

with the lifting device.
Truck weight (with battery):see technical specifica-

tions.

–

Remove the load before hoisting the pallet

truck.

–

Disconnect the power supply.

–

Attach slings in the positions identiﬁed by

the hook symbol.

CAUTION

Risk of major equipment damage.
It is strictly forbidden to attach the lifting slings to the

operating handle or to other points not intended for

this purpose.

Truck transport

–

Place the truck on a wooden pallet.



Operation

Hoisting

5001 801 1555 EN - 12/2020

Summary of Contents for ECH 15









































































































Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands

Still ECH 15, Original Instructions Manual

Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands