Still ECH 15, Original Instructions Manual

Page: 36 / 104

When changing wheels, always ensure that
this does not cause the truck to tilt to one side
(e.g. always replace right and left wheels at
the same time). Changes must only be made
following consultation with the manufacturer.
Wheels approved by the manufacturer can be
found on the spare parts list. If other wheels
are to be used, authorisation from the manu-
facturer must be obtained beforehand.
–
Contact your authorised service centre re-
garding this matter.
Medical devices
The operation of medical devices, for example
pacemakers or hearing aids, can be impaired.
Check with your doctor or manufacturer if the
medical devices are sufficiently protected
against electromagnetic interference.
Emissions
Noise emission values
Calculated during the test cycle performed in
accordance with standard EN 12053
Acoustic pressure level on the driver's compartment
ECH 15
L
PAZ
<70
NOTE
Lower or higher noise values may occur when
using industrial trucks， e.g. due to the mode
of operation, environmental factors and other
sources of noise.
Vibrations
Vibrations to which the hands and arms
are exposed
The following value is valid for all truck mod-
els:
●
Vibration characteristics < 2.5 m/s
2
Safety
2
Basic principles for safe operation
28 5001 801 1555 EN - 12/2020