Still ECH 15 Page 21 Original Instructions Manual Download

Page: 21 / 104

cuts off the power. Automatic braking is acti-

vated when the tiller is in the horizontal or ver-

tical position (end stop brake).

Battery

Equipped with lithium-ion battery.
The display unit displays the battery's remain-

ing charge.

Description of use and climatic conditions

Normal use

–

Indoor use.

–

Driving (travelling and lifting ) on a substan-

tially firm, smooth and prepared surfaces.

–

Driving with the horizontal load centre of

gravity approximately on the longitudinal

centre plane of the truck.

–

Ambient temperature ranging from 5°C to

+40°C.

NOTE

If the Forklift is used for a long time in an envi-

ronment lower than 5 ℃, in a cold storage or

under extreme temperature and humidity

changes, special equipment must be installed

additionally and the manufacturer's permission

must be obtained.

–

The truck's maximum operation altitude is

up to 2000 m.

Introduction

Description of use and climatic conditions

5001 801 1555 EN - 12/2020

Summary of Contents for ECH 15









































































































Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands

Still ECH 15, Original Instructions Manual

Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands