Still ECH 15 Original Instructions Manual Download Page 70

Page: 70 / 104

Battery charger

Charging precautions

–

The truck must be parked in a well-ventila-

ted room.

–

There must be no metal objects on the sur-

face of the battery.

–

Before the start of the charging procedure,

check all cable connections and plug con-

nectors for obvious damage.

–

Make sure that the charger is not connected

to the circuit before connecting or discon-

necting it.

–

The safety regulations supplied by the bat-

tery and charging station manufacturer

must be strictly observed.

Charging procedure

–

Ensure that charging requirements are

complied with.

–

Park the truck correctly.

–

Open the swivelling hood (1).

–

Unplug the power current plug (2), then

plug it into a suitable power source.

CAUTION

The charging voltage range is 100–240 V, 50–60 Hz.

Do not exceed this voltage range.

Charging indicator light

LED

status

phenome-

non

Malfunction analysis

Exclusion method

Description

Red light remains

lit

Normal status

Charger is charging



Battery use and maintenance

Battery charger

5001 801 1555 EN - 12/2020

Summary of Contents for ECH 15









































































































Search results

Summary of Contents for ECH 15

Reviews:

Still ECH 15, Original Instructions Manual, Page: 70 / 104

Search results

Summary of Contents for ECH 15

Reviews: