Still ECH 15 Page 19 Original Instructions Manual Download

Page: 19 / 104

Environmental considerations

Packaging

During delivery of the truck, certain parts are

packaged to provide protection during trans-

port. This packaging must be removed com-

pletely prior to initial start-up.

ENVIRONMENT NOTE

The packaging material must be disposed of

properly after delivery of the truck.

Disposal of components and batter-

ies

The truck is composed of different materials. If

components or batteries need to be replaced

and disposed of, they must be:

●

disposed of,

●

treated or

●

recycled in accordance with regional and

national regulations.

NOTE

The documentation provided by the battery

manufacturer must be observed when dispos-

ing of batteries.

ENVIRONMENT NOTE

We recommend working with a waste man-

agement company for disposal purposes.

Technical description

The Electric Pallet Trucks is used for handling

pallets and have a maximum load capacity of

1500 kg.

Design

The latest ergonomic and practical design,

adaptable to all operators and working condi-

tions.

Introduction

Environmental considerations

5001 801 1555 EN - 12/2020

Summary of Contents for ECH 15









































































































Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands

Still ECH 15, Original Instructions Manual

Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands