ASTOTHERM PLUS Instructions for Use
9 Getting started
24
9 Getting started
Getting started is grouped into 4 sections. Read through each section before
performing a procedure.
CAUTION
Risk of injury!
Use only approved infusion sets / infusion extensions.
ASTOTUBE is the original CE-marked accessory for ASTOTHERM PLUS.
ASTOTUBE
Order No.
Description
Suitable for model
IFT 40410
Sterile infusion extension made from PVC,
outer diameter Ø 4 mm, length 592 cm.
Filling volume approx. 42 ml
AP220
9.1 Preparation for use
WARNING
Risk of injury!
Do not use the ASTOTHERM PLUS until the following error conditions have
been remedied through appropriate corrective action:
- Damaged or worn cables or plugs.
- Damaged housing, damaged or loose control panel.
- Device has been exposed to mechanical impact / exposed to severe
shock or exposed to liquid.
- Alarm without knowing the cause.
- Damaged or missing markings/safety signs/warnings on the warmer.
Use of the ASTOTHERM PLUS must be carried out under the supervision of
a physician.
The mains cable should not touch the patient and should not hinder the
treating personnel.
CAUTION
Risk of injury!
When fixing the Warmer to a mounting device (e.g. IV pole) pay attention to the
max. safe working load and tipping stability. Using normal infusion stands
ASTOTHERM PLUS may be mounted at a height of up to165 cm. If you use
the robust IV pole ASTOSTAND, the device can be mounted up to 180 cm.
Do not position the device in a manner that is difficult to disconnect it
from mains by the mains plug.
