MS 201 T
English
38
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
Engine
Single cylinder two-stroke engine
Ignition System
Electronic magneto ignition
This ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Regulations ICES-002.
Fuel System
All position diaphragm carburetor with
integral fuel pump
Chain Lubrication
Fully automatic, speed-controlled oil
pump. Additional manual oil flow control
Weight
Cutting Attachment
The actual cutting length can be less
than the specified cutting length.
STIHL cutting attachments complying
with CSA Standard Z 62.3:
Rollomatic guide bars
3/8" Picco chains
Chain Sprockets
Other cutting attachments
Other cutting attachments complying
with CSA Standard Z 62.3 are available:
see section CSA Standard Z 62.3, the
"Chain Leaflet" inside the chain box or
contact your local STIHL dealer.
Please ask your STIHL dealer to
properly match your powerhead with the
appropriate bar/chain combinations to
reduce the risk of kickback injury.
Specifications
A = 300 hours
B = 125 hours
C = 50 hours
Displacement:
35.2 cc
Bore:
40 mm
Stroke:
28 mm
Engine power to
ISO 7293:
1.8 kW (2.4 bhp)
at 9,500 rpm
Idle speed:
3,000 rpm
Max. permissible
speed (with cutting
attachment):
14,000 rpm
Spark plug (resistor
type):
NGK CMR 6 H
Electrode gap:
0.5 mm
Fuel tank capacity:
310 cc (0.31 l)
Oil tank capacity:
220 cc (0.22 l)
Weight (dry, without bar and chain):
MS 201 T:
3.7 kg
MS 201 TC:
3.8 kg
Bar lengths (3/8" P
pitch):
30, 35, 40 cm
Groove width:
1.3 mm
Picco Micro 3 (63 PM3) Type 3636
Pitch:
3/8" P
(9.32 mm)
Drive link gauge:
1.3 mm
Picco Super 3 (63 PS3) Type 3616
Pitch:
3/8" P
(9.32 mm)
Drive link gauge:
1.3 mm
Picco Duro 3 (63 PD3) Type 3612
Pitch:
3/8" P
(9.32 mm)
Drive link gauge:
1.3 mm
6-tooth for 3/8" P (spur sprocket)
