![background image](http://html1.mh-extra.com/html/stihl/ms201t/ms201t_instruction-manual_1378794015.webp)
MS 201 T
English
13
Fitting the guide bar
N
Turn screw (1) to the left until the
tensioner slide (2) butts against the
left end of the housing slot
N
Fit the guide bar over the screw (3)
and engage the peg of the tensioner
slide in the locating hole (4)
Fitting the saw chain
WARNING
Put on protective gloves – risk of injury
by the sharp cutters!
N
Fit saw chain around the sprocket
wheel (1) and over the guide bar –
the cutting edges of the teeth must
point to the right
N
Turn screw (2) to the right until there
is very little chain sag on the
underside of the bar – and the drive
link tangs engage in the bar groove
N
Refit the chain sprocket cover –
the pivot pin on the hand guard must
engage in the sleeve – and then
screw on the nut by hand until it is
fingertight
N
Go to chapter "Tensioning the Saw
Chain"
161BA027 KN
1
2
3
4
161BA028 KN
1
161BA029 KN
2
161BA030 KN
0012BA003 KN