![background image](http://html1.mh-extra.com/html/stihl/ms201t/ms201t_instruction-manual_1378794009.webp)
MS 201 T
English
7
To reduce risk of fire, keep hot exhaust
gases and hot muffler away from easily
combustible materials (e.g. wood chips,
bark, dry grass, fuel). Mufflers with a
catalytic converter can become
particularly hot.
Never operate your saw without proper
chain lubrication – check oil level
regularly during operation. Stop work
immediately if the oil level is too low and
refill the oil tank – see also chapters on
"Filling Chain Oil Tank" and "Checking
Chain Lubrication".
If your saw is subjected to unusually
high loads for which it was not designed
(e.g. heavy impact or a fall), always
check that it is in good condition before
continuing work – see also "Before
Starting Work".
Check the fuel system in particular for
leaks and make sure the safety devices
are working properly. Do not continue
operating your saw if it is damaged. In
case of doubt, have the unit checked by
your servicing dealer.
Make sure the idle speed setting is
correct. The chain must not run when
the engine is idling with the throttle
trigger released. Check and correct the
idle speed setting regularly. It the chain
continues to rotate when the engine is
idling, have your dealer make proper
adjustments or repairs.
Ensure proper ventilation when working
in trenches, hollows or other confined
locations – risk of fatal injury from
breathing toxic fumes!
If you feel sick, have a headache, vision
problems (e. g., your field of vision gets
smaller), hearing problems, dizziness or
inability to concentrate, stop work
immediately. Such symptoms may be
caused by an excessively high
concentration of exhaust emissions –
risk of accident!
After finishing work
Switch off the motor, engage the chain
brake and attach the chain scabbard.
Storage
When the machine is not in use, it
should be stored in such a way that no-
one is endangered. Secure the machine
against unauthorised use.
Store the machine in a safe, dry room.
Loss-proof chain scabbard
The loss-proof chain scabbard is
designed especially for using the chain
saw in a tree.
Rings (1) – for fastening the chain
scabbard to the user's harness.
Snap fitting (2) – the loss-proof chain
scabbard is held firmly on the sprocket
cover of the chain saw. This keeps it
from slipping off of the guide bar during
transport.
Broad base (3) – for covering the spiked
bumper
Application
Always push the chain scabbard onto
the guide bar as far as it will go. Snap
fitting (2) must snap onto the chain
sprocket cover.
The chain saw produces
poisonous exhaust gases
as soon as the engine
starts. These gases may
be colourless and odour
-
less and may contain
unburnt hydrocarbons
and benzene. Never work
with the machine indoors
or in poorly ventilated
areas, even if your
machine is equipped with
a catalytic converter.
2 3
0012BA029 KN
1
0012BA028 KN
2