![background image](http://html1.mh-extra.com/html/stihl/ms201t/ms201t_instruction-manual_1378794010.webp)
MS 201 T
English
8
Always use one of the two rings to fasten
the chain scabbard to the harness for
storage while working.
Always use the pull-out ring (4) on the
back of the chain saw to transport and
secure the chain saw on a rope.
Never use one of the chain scabbard
rings (1) to transport or secure the chain
saw – risk of accident due to falling chain
saw!
Vibrations
Prolonged use of the power tool may
result in vibration-induced circulation
problems in the hands (whitefinger
disease).
No general recommendation can be
given for the length of usage because it
depends on several factors.
The period of usage is prolonged by:
–
Hand protection (wearing warm
gloves)
–
Work breaks
The period of usage is shortened by:
–
Any personal tendency to suffer
from poor circulation (symptoms:
frequently cold fingers, tingling
sensations).
–
Low outside temperatures.
–
The force with which the handles
are held (a tight grip restricts
circulation).
Continual and regular users should
monitor closely the condition of their
hands and fingers. If any of the above
symptoms appear (e.g. tingling
sensation in fingers), seek medical
advice.
Maintenance and repairs
Always switch off the engine before any
repair, cleaning or maintenance work
and any work on the chain. Risk of injury
if the engine starts inadvertently!
Exception: adjustment of carburettor
and idle speed.
The machine must be serviced regularly.
Do not attempt any maintenance or
repair work not described in the
Instruction Manual. All other work should
be carried out by a servicing dealer.
STIHL recommends that maintenance
and repair work be carried out only by
authorised STIHL dealers. STIHL
dealers receive regular training and are
supplied with technical information.
Use only high-quality spare parts.
Otherwise, there may be a risk of
accidents and damage to the machine. If
you have any questions in this respect,
consult a servicing dealer.
Do not modify the machine in any way –
this may increase the risk of personal
injury –risk of accidents!
To reduce the risk of fire due to ignition
outside the cylinder, move the master
control level to STOP, 0 or
†
before
turning the engine over on the starter
when the spark plug boot is removed or
the spark plug is unscrewed!
Do not service or store the machine near
a naked flame – risk of fire due to the
fuel.
Check fuel cap regularly for tightness.
Use only spark plugs that are in perfect
condition and have been approved by
STIHL – see "Specifications".
Check ignition lead (insulation in good
condition, secure connection).
Check that the muffler is in perfect
working condition.
Do not use the machine if the muffler is
damaged or missing – risk of fire,
damage to hearing!
Never touch a hot muffler – risk of burns!
0012BA026 KN
4
1
0012BA027 KN