![background image](http://html1.mh-extra.com/html/stihl/fc-75/fc-75_user-manual_1378585026.webp)
- Press ignition module against
setting gauge and tighten screws
to a torque of 4.5 Nm.
Remaining parts are installed in
reverse order.
Removing the flywheel:
•
Remove clutch,
•
Remove flywheel.
Note: If the flywheel cannot be re-
moved by hand, screw puller (1)
4133 893 0800 onto crankshaft
stub and lightly tap the end of the
puller with a hammer.
Unscrew the puller when the
flywheel has loosened.
Flywheel (1) and magnet poles (2)
must not be cracked or damaged,
otherwise a new flywheel must be
fitted.
Installing the flywheel:
Important! Degrease the crank-
shaft stub and bore of the flywheel
hub with commercially available
solvent-based degreasing agent
not containing CFCs or halocar-
bons,
- Fit flywheel.
- Install clutch,
392RA066
VA
392RA067
VA
366RA114
1
2
VA
392RA068
1
VA
26