![background image](http://html1.mh-extra.com/html/stihl/fc-75/fc-75_user-manual_1378585043.webp)
- Remove control handle,
•
Unscrew nuts (1).
•
Remove lower clamping element
(2), clamping element (3),
cowhorn handle (4) and upper
clamping element (5) with bolts
(6).
- Carefully slice open left-hand
handle and pull it off.
- Clamp cowhorn handle in vice
with protective jaws (vee jaws).
- Coat interior of handle with a
little lubricant (e.g. washing-up
liquid) around the opening.
Note: The handle can sub-
sequently be rotated on the
handlebar if too much lubricant is
used. It must therefore be allowed
to dry for some time after installa-
tion.
•
Slide handle onto handlebar so
that the longer ends point
towards the gearbox and are at
an angle of approx. 10 ... 15 de-
grees in relation to the protective
tube.
Looped handle without U-bar
•
Unscrew nuts (1).
•
Remove lower bracket (2).
•
Pull out bolts (1).
•
Remove looped handle (2) and
upper bracket (3).
The parts are fitted in reverse
order.
•
Line looped handle up at a
distance A = 20 cm in front of
control handle and secure it in
position.
Looped handle with U-bar
•
Remove screws (1).
•
Remove lower bracket (2).
•
Remove U-bar (1), looped hand-
le (2) and upper bracket (3).
•
Remove square nuts (4) from U-
bar.
The parts are fitted in reverse
order.
•
Line looped handle up at a
distance A = 20 cm in front of
control handle and secure it in
position.
43