![background image](http://html1.mh-extra.com/html/stihl/fc-75/fc-75_user-manual_1378585002.webp)
This Repair Manual contains a
detailed description of all the typi-
cal repair work required for these
series of power tools.
Repairs to be undertaken on stan-
dard parts and assemblies which
are used in several STIHL power
tool series are described in sepa-
rate repair manuals.
Attention is drawn to these instruc-
tions at the relevant points in this
manual.
Since the brushcutters FS 75,
FS 80, FS 85, FC 75 and the
hedge trimmer HL 75 are almost
identical, the descriptions and ser-
vicing procedures in this manual
generally apply to all five models.
Differences are described in detail.
The illustrated spare parts lists
should also be consulted when car-
rying out repairs, for they show the
installed position and sequence of
assembly for the individual parts.
The latest edition of the respective
parts lists should always be used
when determining the part num-
bers of the required replacement
parts. Microfilms are more up-to-
date than printed spare parts lists!
Faults in the machine may be due
to several causes.
Note the "Summary of faults" for
all function groups in the manual
"Troubleshooting, standard
repairs".
Note the "Technical Information"
sheets, for they describe technical
changes implemented after publi-
cation of this Repair Manual. The
Technical Information sheets supp-
lement the parts list until a new edi-
tion is published.
The special tools mentioned in the
text are listed in the last chapter of
this manual. The tools can also
be identified in the manual of
"STIHL tools" on the basis of their
part number.
The manual lists all the tools supp-
lied by STIHL.
The following graphic symbols are
used in the text and illustrations in
order to make this manual easier
to use and understand:
In the text:
•
= Activity to be carried out;
corresponds to the activity in
the picture above the text.
- = Activity to be carried out, but is
not shown in the picture above
the text.
In the illustrations:
-
= Short arrow indicating: Note
-
= Long arrow indicating: Go to
Repair Manuals and Technical In-
formation sheets should always be
on hand wherever repairs are car-
ried out. They must not be passed
on to third parties.
Repairs can be carried out more
easily by mounting the power unit
on the assembly stand (2)
5910 890 3100 with the clamping
plate (1) 5910 890 2100.
The power unit can then be swivel-
led into the most suitable working
position, leaving both hands free
for the work itself.
Secured with M5 x 30 screws after
disassembling the protective tube,
shroud, starter cover and remo-
ving the fuel tank.
Always use original STIHL replace-
ment parts.
Original STIHL parts can be iden-
tified by the STIHL part number,
the
logo and the STIHL
parts symbol
.
The symbol may appear alone on
small parts.
1
1 2
2
392RA001 VA
2