![background image](http://html1.mh-extra.com/html/stihl/fc-75/fc-75_user-manual_1378585015.webp)
Always check and repair the fuel
system, carburetor, air filter and
ignition system before looking for
faults on the engine.
Refer to manual "Troubleshooting,
standard repairs" for troubleshoo-
ting procedures.
- Remove fan housing with pro-
tective tube,
- Remove muffler,
- Remove carburetor,
- Remove ignition module,
•
Remove throttle cable from
tensioner.
•
Remove screws.
- Remove spacer flange and
gasket.
•
Pull screws (1) out of spacer
flange if necessary.
•
Loosen screw (2) and remove
with bushing.
•
Draw tensioner (3) off spacer
flange.
•
Remove adjusting screw from
tensioner.
The parts are assembled in rever-
se order.
•
Insert screw (1) with bushing (2).
- Use a new self-locking nut for
the screw.
•
Use a new gasket.
- Tighten down the screws of the
spacer flange to a torque of
5.5 Nm.
392RA027
VA
392RA028
VA
392RA030
VA
2
392RA031
1
VA
392RA029
1
3
2
1
VA
392RA032
VA
Exposing the cylinder/
spacer flange
15