Page 14 of 31
INLET FLAPS
SETTINGS
Set parameters, per ventilation group:
•
Control temperature flap (flap on temperature or pressure).
•
Bandwidth (flap on temperature or pressure).
•
Minimum at ventilation (flap on ventilation/tunnel).
•
Maximum at ventilation (flap on ventilation/tunnel).
•
Min./Max. ventilation.
Show measurements/calculations of the above parameters.
OPTIONS
Set the initial percentage of the 2
nd
and/or 3
rd
flap(s) if a cascade control has
been installed with a ventilation group.
GROWTH CURVE
Set growth curve per ventilation group (except for the flaps that have been set
to “Tunnel”):
•
Temperature.
•
Min./Max. ventilation.
COMPENSATIONS
Set influence of RH and CO
2
compensation.
ALARMS
Switch the alarm on/off for individual ventilation groups and flap controls.
Alarm display status.
Display of calculated alarm limits.
HEATING
Set heating:
•
Call up settings and measurements for the individual heating systems.
•
Set the firing line with the central heating.
(heating 1..6, 2-stage heating, central heating 1 and 2)
GROWTH CURVE
Set the heating temperature curve (does not apply to 2-stage and central
heating systems).
ALARMS
Switch the alarm on/off for the individual heating systems.
Set alarm limits.
Alarm display status.