Stewart Filmscreen
– Visionary
20
INSTALLING THE SCREEN ASSEMBLY INTO THE CASE
Now that the wiring for your Visionary is complete, you may install the screen assembly into the
case.
1. Follow this procedure to mount the
screen assembly in the case. Be
sure you have performed the
appropriate electrical hookup first.
2. Raise the screen assembly to the
previously mounted case.
3. Insert the interlocking modular
connector from the screen
assembly to the corresponding
connector in the case (see Figure
15).
4. Make sure the cable and modular
connectors stay inside the
electrical box when the screen
assembly is inserted into the case.
5. Using the wrench provided, secure
the screen assembly to the case
using bolts inside each end of the
screen slot. As you tighten the
bolts, the screen assembly/ceiling
cover will move forward and lock
into place on the case.
⚠
CAUTION
During installation of the Visionary screen into the mounted housing, be advised that
damage can occur to the screen. Perform the following actions to avoid damage:
When lifting the screenroll assembly up into the case, make sure the screen does not
come into contact with the sides of the housing.
Notice the flange screw positions on the inside of the case and take precautionary steps
to avoid hitting these with the screenroll.
When installing the screenroll assembly make sure that the screen never contacts or
strikes any objects as damage will occur as a result.
Figure
15
. Installing screen
assembly
