Stewart Filmscreen
– Visionary
26
The motor shuts off. The
motor has been in use for
more than 2 minutes
The motor is designed for
short operations (lowering and
retracting), not continuous
duty. Longer operation causes
the motor to overheat and shut
off
Allow the motor to cool down.
Complete cooling can take
an hour or more. Heat gain is
cumulative and takes time to
dissipate. If motor use is
initiated before it has cooled
completely. The motor will
shut down again when it
reaches maximum
temperature
Dirt, fingerprints, marks,
etc., on the screen surface
Improper handling of screen
Lightly brush off or use a mild
water-based detergent
solution with a clean rag or
cotton swab
Indentions appear on
screen surface
Debris or particles adhering to
screen due to static cling
Check back of screen; gently
brush debris away with a soft
brush
