Stewart Filmscreen Visionary Owner'S Manual Download

Page: 6 / 28

Stewart Filmscreen

– Visionary

PREPARING THE INSTALLATION

Before proceeding with the installation of this screen, take time to thoroughly read and understand

these installation instructions.

Failure to comply with the instructions contained in this manual

may result in voiding your warranty.

SPECIFICATIONS

Specifications regarding the individual screen dimensions, weight, etc., are provided by the

factory when the unit is ordered.

Before beginning the installation



Check the size and weight of the screen to be installed so that you can plan for the number

of people required for installation.



You will need at least two people to mount a small screen. More are needed for larger,

heavier screens.



Read everything before you do anything!

What’s inside the box?

Inside your Visionary unit box, you will find everything needed to get started enjoying your

Stewart screen:



Visionary unit preassembled and prewired



Packing material



Control option



Visionary Quick Start Guide

You will need



A level



A drill



A drop cloth



Tools for tightening fasteners



Ladders for the personnel supporting the screen during the mounting process



Fasteners appropriate for the surface on which the screen is being mounted

Summary of Contents for Visionary





























Search results

Summary of Contents for Visionary

Reviews:

Related manuals for Visionary

Brands by name

Popular brands

Stewart Filmscreen Visionary, Owner'S Manual

Search results

Summary of Contents for Visionary

Reviews:

Related manuals for Visionary

Brands by name

Popular brands