Stewart Filmscreen
– Visionary
11
ELECTRICAL (CONTINUED)
Stewart Filmscreen supplies a short electrical
connection wire that is fitted with a Molex motor
connector. You will connect the harness (pigtail) to the
incoming AC Romex or service cord by wire nuts (see
Figure 5).
Feed the incoming AC Romex or service cord
through the Romex connector on the housing.
Connect the pigtail with wire nuts on the inside of the
housing. The AC connection to this pigtail should
never be made on the outside of the enclosure as
this would violate NEC electrical code and UL
standards.
Figure 5.
Molex connector unplugged
with electrical source ready
⚠
CAUTION
Make sure to finish all wiring before installing the screen assembly into the mounted
case.
