stertil-KONI ST 1082-F/BAT, Installation, Operation And Service Manual

Page: 20 / 52

16
5.4 WHEEL ADAPTERS (OPTIONAL)
The mobile lifting columns can be used to lift vehicles with a wheel diameter of
R12 (500 mm, 19 ¾”) to R22.5 (1140 mm, 45”). Wheel adapters (fig. 5.4) are
required for use with different wheel diameters.
Two adapters are required for tire size of R12 (500 mm, 19 ¾") to R15 (650 mm,
25 ½").
One adaptor is required for tire size R15 (650 mm, 25½") to R17 (900 mm, 35½").
No adaptors are used for tire size R17 (900 mm, 35 ½") to R22.5 (1140 mm, 45").
There are special adapters for smaller wheel diameters (< 500 mm, 19 ¾").
5.5
LONGER WHEELADAPTORS (OPTIONAL ONLY ON ST 1082-F)
Special (6” longer) wheel adaptors (fig. 5.5) are available for in-set wheels (for RVs, school buses etc).
WARNING: These longer adaptors can only be used
together with wheel arm extensions for the column.
The lifting capacity will be reduced to 12,000/8,800 lbs (see attached label fig. 5.5a). The reduced capacity is
clearly indicated on the sides of the longer wheel adaptors.
Please note that with the longer adaptors, the lifting capacity still remains 12,000/8,800 lbs, check the
maximum load that has to be lifted carefully.
The capacity with removed wheel adaptors is 18,000 lbs; the lower wheel arm extensions do not have to be
removed (see fig. 5.5.b).
Fig. 5.4
Fig. 5.5a Fig. 5.5b