STERO UNDERCOUNTER DISHWASHER & GLASSWASHER |
17
OPERATING THE STERO DISHWASHER & GLASSWASHER
Do This
Display Shows
Remarks
Press ON.
Model number.
Dishwasher performs self-check. This
takes 5 seconds.
FILL and fill icon lit; sump temperature
displayed when machine is filling.
WARMING UP and warming up icon
are displayed when booster is pre-
heating. This preheat could take up to
15 minutes.
Dishwasher fills with water. When
filled, pump turns on for 10 seconds.
If door is opened during fill cycle, fill
will stop. After door is closed, the pro-
cess continues where it stopped.
During fill, sump temperature is
displayed.
When filled, machine will maintain an
idle state. Heat is maintained in both
sump and/or booster.
Open door; slide rack of dishes
into dishwasher. Close door.
READY lit and sump temperature
displayed.
Detergent will be added automatically
during wash cycle.
Rinse Aid and Sanitizer will be added
automatically during rinse cycle.
(NOTE: Sanitizer only used on SU-L &
SG models.)
Press WASH.
WASH and wash icon lit; sump tem-
perature displayed during wash cycle.
RINSE and rinse icon lit; rinse tem-
perature displayed during rinse cycle.
Machine initiates a wash and rinse
cycle.
If door is opened during wash, rinse,
or drain cycle, cycle will continue at
point where door was opened upon
closing door.
If POWER is pressed during cycle,
machine will drain and shut down.
When cycle is complete, reload
machine for next wash/rinse
cycle; or, if not in use, machine
will maintain idle mode.
READY lit and sump temperature
displayed.
Machine will drain and shut down if
the four hour idle shutdown time is
reached.
At the end of the day, press
POWER.
DRAIN and SHUTDOWN IN PROGRESS
are displayed; then the display shuts
down.
When POWER key is pressed, machine
will drain and shut down.
OPERATION
(continued)
