Steris AL-1000, Maintenance Manual

Page: 4 / 35

AL ‐ 1000 Installation ‐ Operation ‐ Service Manual P764333 ‐ 823 December 18, 2009
3
AL ‐ 1000 Dimensions
PRE-INSTALLATION
(1) Check all applicable plumbing and electrical codes before installation. This will help to ensure that the system is
installed in a safe and suitable manner.
(2) Get a wiring schematic of the washer (provided by the machine mfr or may be on the machine itself).
(3) Check to make sure that all functions of the washer are operating properly.
(4) Check the proposed location for a 115 VAC receptacle for AL-1000.
Before beginning the installation, make sure you have the following tools and materials ready...
•
Flat and Phillips screwdrivers. One screwdriver needs
to have a long (20 cm) shank to reach the bottom
mounting screw on the dispenser.
•
Drill and drill bits. Use a 3/16” Masonry or standard bit depending on wall surface.
•
Suitable 115 VAC electrical outlet with 2 Amp per pump dispenser (.5 amp per pump)
•
Wire cutters, wire and cable strippers, and channel locks.
•
Tubing cutter
•
Wire terminal connectors and a crimping tool.
•
Voltmeter (or multi-meter).
•
Dry wall anchors and mounting screws.
•
Colored 3/8” Poly tubing
•
AL-1000 communication cable (no substitutes)
•
Prolystica chemical container holder
•
Plastic 3” wire ducting