Stephill SE6000D4 Operation Manual Download Page 4

SSD6000-SSD6000S-SE6000D4

3

© Stephill Generators Ltd.
All rights reserved.

Operation with incorrect fuel, lubricating oil or coolant.

Improper repair or use of parts not supplied or approved by Stephill Generators Ltd.

Lack of, or incorrect maintenance.

Issue

Date

By

Introduction

Warranty Statement

This document has been produced for the owner/user of a Stephill generator. Inside this manual you will find 
important safety, operating, maintenance and fault finding information.

The information contained within this manual is based upon the current data available before print. Due to 
constant improvements on our products some information contained within this manual may change without 
warning. Therefore Stephill Generators Ltd reserve the right to alter specifications as and when situations 
demand without warning or obligation.

No part of this material may be reproduced in any form by any means without the written permission of 
Stephill Generators Ltd.

All equipment supplied by Stephill Generators Ltd carries a warranty of 12 months from date of despatch. 
During the warranty period, should the plant fail due to faulty design, materials or workmanship by Stephill 

Generators Ltd or it’s sub-contractors, we undertake to rectify the fault. Stephill Generators Ltd will accept no 

responsibility whatsoever for equipment that has failed due to; 

Fair wear and tear, misuse, negligence, accidental damage, improper storage and incorrect starting / warm-
up / run-in or shutdown.

No warranty claim will be considered by Stephill Generators Ltd unless any defective parts are available for 
inspection by us, or our nominees, to determine the reason or cause of failure, and Stephill Generators Ltd is 
given the option of repair or replacement. 

Stephill Generators Ltd are not responsible for incidental or consequential damages, downtime, or other 
costs due to warrantable failure, and unauthorised alterations made to any product supplied by Stephill 
Generators Ltd.

Amendments

Amendment

Summary of Contents for SE6000D4







































Reviews: