SVX8004 IP PBX System User Guide
陈泽科技有限公司
- 33 -
www.stephen-tele.com
to save the “rrp” file to your computer.
Restore ROXos to -
Click “Browse” to select the “rrp” backup file you saved before then click “Restore ROXos to”. The system
will restore data from the file.
Restore to default -
Click this button and all the data will be restored to the factory default.
4.
Using the telephone
4.1.
Making calls
4.1.1.
Making internal calls
Internal calls can be made between any extensions including onboard extensions and IP extensions once they have been
successfully registered to SVX8004 IP PBX.
Pick up your extension’s handset.
Listen for the dial tone.
Dial the number of the extension or the number of the ring group followed by “#”.
4.1.2.
Making outgoing PSTN calls via onboard line
When the SVX8004 IP PBX system is up, the default “Onboard_Line” group is ready for outgoing calls via onboard lines. Before
making any outgoing calls via the “Onboard_Line” group, you must add an outbound rule to specify what number the extensions
should dial. (To learn to add an outbound rule, please refer to the section “Configure Outbound Rules”.)
Pick up your extension’s handset.
Listen for the dial tone.
Dial the outbound prefix of the “Onboard_Line” group.
Dial the PSTN number followed by “#”.
4.1.3.
Making outgoing PSTN calls via VoIP gateway
Make sure the VoIP gateway has been added and the lines have been successfully registered to the SVX8004 IP PBX. Then make
