SVX8004 IP PBX System User Guide
陈泽科技有限公司
- 16 -
www.stephen-tele.com
3.2.4.
Extension Manage
Click the “Extensions” menu, and “Manage” submenu. The Extension Manage table will appear. All the added extensions are listed
in this table. You can delete an IP extension by ticking the box corresponding to the number and clicking the “Delete” button on the
top left of the table. Just click on the number to enter the “Edit Extension” screen if a parameter change is needed.
3.3.
Configure PSTN Lines
SVX8004 IP PBX has 2 onboard line ports which can be connected with 2 PSTN lines. The system can be extended to up to 6 PSTN
lines via FXO Gateway if more PSTN lines needed.
3.3.1.
Configure Onboard PSTN lines
Click the “Lines” menu, and “Onboard Line” submenu. The Onboard Line table will appear. You can edit the parameters of each Line
port by selecting “
Line1
” or “
Line2
”.
Line ID -
The Line ID is a read-only value. It is generated by the system automatically and is used to identify each line in the
system.
Line Group -
Line Group consists of analog or VoIP lines that are associated so that calls to any line in the group are rolled over
to the next available line in the group when the line is busy. The 2 onboard lines belong to the “Onboard_Line” group.
External Number -
The PSTN number of the PSTN line connected to the Line port.
Call Direction -
Only incoming calls are allowed on the line if “Incoming” is selected; only outgoing calls are allowed on the line
if “Outgoing” is selected; both incoming and outgoing calls are allowed on the line if “Both” is selected.
Incoming call route -
Select the destination where the incoming call will be routed.
Reject call -
The call will be rejected immediately and the caller will hear a busy tone.
Auto Attendant -
The call will be answered by the auto attendant and the caller will hear a voice prompt.
