SVX8004 IP PBX System User Guide
陈泽科技有限公司
- 19 -
www.stephen-tele.com
3.3.3.
Configure the VoIP Gateway
After adding the VoIP gateway line group and creating the SIP accounts for each line, you should configure the VoIP gateway to
register its lines to the SVX8004 IP PBX system.
Configure the VoIP registration
Each line created for the VoIP gateway in the SVX8004 IP PBX System has to be configured in the VoIP gateway’s “SIP” or “VoIP”
settings section. Each line has to be configured with a SIP account including Line ID (line number), Authentication ID and
Authentication Password. These must match the values you entered in the corresponding fields of the lines you created in the
SVX8004 IP PBX.
Configure the Routing
Once your gateway has been configured and its “SIP” or “VoIP” lines are registered with
the SVX8004 IP PBX System server, the gateway must be configured to forward incoming calls from the PSTN to the line
numbers(Line ID) of the PSTN lines created in the SVX8004 IP PBX.
Many VoIP gateways can be configured to work with SVX8004 IP PBX. We recommend the following:
CHIMA -
SVG6000B
CHIMA -
SVG6116
Grandstream -
GXW-4104
D-Link -
DVG-3004S
Micronet -
SP 5050
Linksys -
SPA3000
Tainet -
Bodhicom 3404/3408
3.3.4.
Line Status
Click the “Status” menu, and “Line Status” submenu. The Line Status screen will appear. Here you can see whether each line of the
gateway is registered or not.
