SVX8004 IP PBX System User Guide
陈泽科技有限公司
- 31 -
www.stephen-tele.com
Ring Timeout (30-90s):
Define the ringing timeout time, for how long the phone will ring until it send a no answer signal back
to SIP server and stop the ringing.
Ring Timeout for Call Forward(15-75s):
Define the ringing timeout time when call forward is activated, for how long the
phone will ring until it forward calls and stop the ringing.
3.7.3.
Voicemail Setting
SVX8004 IP PBX has 16M bytes flash memory space and can store up to 3 hours voicemail messages in G.729. By default 14
voicemail box accounts are created and the space for each extension is about 12 minutes. You can decrease the number of the
accounts if not all the extensions need to be voicemail box enabled, so that each account can get more memory space.
Click the “General” menu, and “Voicemail Settings” submenu. The “Voicemail Setting” page will appear.
Voicemail Account -
Specify how many voicemail accounts should be created.
Voice Record Length -
Specify the record length for each voice mail message
Msgs Per Mailbox -
This is a read only parameter. It shows how many messages can be saved in each voicemail box. Its value
changes according to the above two parameters.
Click “OK” to submit the changes, and then click “Save & Reload” to reload the system to take immediate effect.
WARNING!
All voicemail messages will be lost if the parameters here are changed, as the system must reformat the flash memory zone for
storing voicemail messages.
The voicemail option of all the extensions will be set to “Off” if the parameters here are changed.
3.7.4.
DSP Settings
Click the “General” menu, and “DSP Settings” submenu. The “DSP Setting” page will appear.
