Stenograph Luminex Captioner Student Edition, User Manual, Page: 44 / 50

38
2018 Stenograph, L.L.C. All Rights Reserved.
38
Luminex Captioner/Student User Guide Chapter 4 Writing on the Captioner/Student Edition
5. To apply your selection, touch Accept .
6. To display the Opening menu, touch Quit , More , Quit .
USB Communication Option
The Luminex Captioner/Student Edition uses the same realtime USB protocol as the élan Mira
®
;
however, some CAT systems look specifically for the writer model instead of the USB protocol. The
USB Communication option allows you to switch the USB protocol from Standard to emulate the élan
Mira, enabling you to connect your CAT system (which looks for a writer model specific information) to
the Luminex Captioner/Student Edition via USB cable for realtime communication.
The USB Communication option only affects realtime communication via USB. Virtual USB serial port
communication is not available.
To change the USB Communications option:
1. From the Opening Menu, touch
Setup , Options .
2. Use the Up / Down sensors to highlight the USB Communication (Writer will Reset if Changes):
option.
3. Touch Change to switch to Mira Emulation or Standard. Standard is the default selection.
The message,
Changing the USB Communications option requires the writer to Reset
.
To change
the option and reset the writer, press Accept or press Cancel. displays.
Do one of the following:
·
Touch Accept to change the USB Communication option and reset the Luminex
Captioner/Student Edition. The writer changes the protocol and resets. The Opening menu
displays. The setting is retained until changed.
· Touch
Cancel
to retain the current USB Communication option and remain at the Options
screen. To return to the Opening menu, touch OK , More , Quit .