manualshive.com logo in svg

Stenograph Luminex Captioner Student Edition, User Manual, Page: 10 / 50

Share
Download
Stenograph Luminex Captioner Student Edition User Manual Download Page 10

4

2018 Stenograph, L.L.C. All Rights Reserved.

4

Luminex Captioner/Student User Guide

Chapter 1 Setting up your Writer

3. Push the quick release lever towards the back of the Luminex Captioner/Student Edition and then

rotate the Luminex Captioner/Student Edition counterclockwise one quarter of a turn.

4. Lift the Luminex Captioner/Student Edition from the tripod.

Charging the Battery

The Luminex Captioner/Student Edition comes with one main rechargeable battery and an internal

backup rechargeable battery. Stenograph recommends that you charge the batteries in your Luminex

Captioner/Student Edition before using it for the first time. Charging time for the main battery is

approximately 4 - 5 hours. Be sure to review the additional battery charging details in the 

Luminex

Captioner/Student Edition Hardware Features

 chapter.

To charge your Luminex Captioner/Student Edition batteries

:

1. Plug the AC charger/adapter into a wall outlet. Use only the AC charger/adapter supplied with your

Luminex Captioner Student Edition.

2. Insert the small plug on the AC adapter/charger cord into the Charger socket on the back of the

Luminex Captioner Student Edition.

3. The Luminex Captioner/Student Edition turns On. A black dot in the lower right corner of the Status

LCD indicates the Luminex Captioner/Student Edition is On. A row of running blocks indicates the
batteries are charging.

If you plug your Luminex Captioner/Student Edition in to charge and only the black dot displays on
the Status LCD, the batteries are charged. Charging is not necessary and no charging occurs

.

Install the Luminex Captioner Student Edition USB Driver

Install the necessary Luminex Captioner/Student Edition Luminex Captioner/Student Edition driver on

your computer. The USB driver allows communication via USB cable between the Luminex

Captioner/Student Edition writing machine and your computer. This includes reading notes, writing

realtime and in the rare event, reading log files. Locate the Let Us Help You Get Started insert that

came with your Luminex Captioner Student Edition. You can easily install the Luminex

Captioner/Student Edition USB drivers by going to 

stenograph.com/utilitycd

 (clicking the link starts the

download immediately) and downloading the Utility files. 
At the 

Do you want to run or save writerutilitysetup.exe...

 prompt, select to do one of the following:

·

To run the Writer Utility Setup, select Run. The Stenograph Utility Setup screen displays.

·

To Save the setup file to your hard disk, select Save. Once the writerutility setup.exe is
downloaded, do 

one

 of the following to install the setup.

8

Summary of Contents for Luminex Captioner Student Edition



















































Reviews:

No comments