15
2018 Stenograph, L.L.C. All Rights Reserved.
15
Luminex Captioner/Student User Guide
Chapter 3 Hardware Features
5. Write a few strokes on the Luminex Captioner/Student Edition before starting realtime and then
start translation on your CAT system.
If the Memory becomes full while writing realtime, the realtime display on the Luminex
Captioner/Student Edition stops scrolling; however, the writing machine continues to send steno
notes to the CAT system.
6. When you are finished writing realtime using the virtual serial port connection, it is important that
you complete the following steps in order. This ensures your computer shuts down properly.
a. Touch
End
on the Luminex Captioner/Student Edition to close the file. If the option, Prompt to
confirm ending job is active, touch
End
again at the prompt.
b. Close and save the realtime file.
c. Unplug the USB cable from your computer and the Luminex Captioner Student Edition.
Touch Sensors (Function Keys)
On either side of the Status LCD are three touch sensors.
Each touch sensor serves a specific purpose, or function, on the different menus. For each function,
there is a menu bar is located at the bottom of the Tilting screen. For example, the following menu bar
is the Opening menu you see:
Summary of Contents for Luminex Captioner Student Edition
Page 1: ......
