9
2018 Stenograph, L.L.C. All Rights Reserved.
9
Luminex Captioner/Student User Guide
Chapter 3 Hardware Features
main battery level. The batteries fully charge in 5 - 6 hours. You can use your writing machine while
the AC adapter/charger charges the battery. The Luminex Captioner/Student Edition battery fully
charged operates all features for approximately 12 hours and then will go into FailSafe mode which
may last up to 3 hours.
To charge your Luminex Captioner/Student Edition batteries
:
1. Plug the AC charger/adapter into a wall outlet. Use only the AC charger/adapter supplied with your
Luminex Captioner Student Edition.
2. Insert the small plug on the AC adapter/charger cord into the Charger socket on the back of the
Luminex Captioner Student Edition.
3. The Luminex Captioner/Student Edition turns On. A black dot in the lower right corner of the Status
LCD indicates the Luminex Captioner/Student Edition is On. A row of running blocks indicates the
batteries are charging.
You can use the Luminex Captioner/Student Edition while the batteries charge. When you begin
writing, the running blocks do not display but the Luminex Captioner/Student Edition continues to
charge. See Status LCD for more information about the Status LCD indicators.
To turn the Luminex Captioning Student Edition Off while charging the batteries, touch the On/Off
sensor until you heard a beep. Although the Titling screen turns off, the Luminex remains On while
charging as indicated by the black dot on the Status LCD.
If you plug your Luminex Captioner/Student Edition in to charge and only the black dot displays on
the Status LCD, the batteries are charged. Charging is not necessary and no charging occurs
.
View Battery Charging Status
The Tilting screen and the Status LCD display graphic indicators that reflect the charging status of
both the main and backup battery. To view specific battery voltage levels, current charging status and
the most recent charging history, go to <Blue Text>View Battery Voltage Levels on page 1.
When the AC adapter/charger is connected to the Luminex Captioner/Student Edition charging the
batteries, the title bar on the Tilting screen displays a "plug" icon with the battery gauge showing
running black and yellow stripes. When the batteries are fully charged, a battery icon displays once
you disconnect the AC adapter/charger.
Battery Charging Battery Fully Charged
When the main battery is charging, the Status LCD displays black bars in running sequence from left
to right. The black bars are not visible when you are writing, but redisplay when you close the job.
When the Luminex Captioner/Student Edition is finished charging, the bars move from each side of
the screen to the middle of the screen in a “clapping” motion. If the AC adapter/charger is plugged in
for a long time, the “clapping” motion stops, however the battery is fully charged.
Summary of Contents for Luminex Captioner Student Edition
Page 1: ......
