The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Only use indoors.
8
TECHNICAL DATA
The terms „device“ or „product“ are used in the warnings
and instructions to refer to Digital Weighing Scale. Do not
use in very humid environments or in the direct vicinity of
water tanks. Prevent the device from getting wet. Risk of
electric shock! Do not cover the ventilation openings!
2.1. ELECTRICAL SAFETY
a)
The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device is
exposed to rain, comes into direct contact with a wet
surface or is operating in a damp environment. Water
getting into the device increases the risk of damage
to the device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e)
If using the device in a damp environment cannot be
avoided, a residual current device (RCD) should be
applied. The use of an RCD reduces the risk of electric
shock.
f)
Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer‘s service centre
g)
ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
2.2. SAFETY IN THE WORKPLACE
a) If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
b)
If there are any doubts as to the correct operation
of the device, contact the manufacturer‘s support
service.
c)
Only the manufacturer‘s service point may repair the
device. Do not attempt any repairs independently!
d)
In case of fire, use a powder or carbon dioxide
(CO
2
) fire extinguisher (one intended for use on live
electrical devices) to put it out.
Parameter
description
Parameter value
Product name
DIGITAL WEIGHING SCALE
Model
SBS-PW-
305C
SBS-
PW-61C
SBS-PW-
152C
Rated voltage [V~]/
Frequency [Hz]
230/50
Working tempe-
rature/
Relative working
humidity
[°C/%RH]
0~+40/<90
Storage
temperature/
Relative storage
humidity
[°C/%RH]
-25~+50/ <70
Battery
6V/4AH
4V/4AH
Division [g]
5
1
2
Max capacity [kg]
30
6
15
Min capacity [g]
20
5
10
Zero range
≤±2%Max
Tare range
½ F.S.
Battery life [h]
100
Display
LCD
Platter dimensions
[mm]
220x310
Dimensions of the
device [mm]
325x350x470
Weight [kg]
4.3
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The original operation manual is in German. Other
language versions are translations from German.
PLEASE NOTE!
Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
2. USAGE SAFETY
ATTENTION!
Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
U S E R M A N U A L
1.
Display panel
2.
Control panel
3.
Power socket and ON / OFF button (not
visible in the picture)
4.
Weighing pan
5.
Head column
6.
Column clamp
7.
Bubble level
1
5
4
3
2
7
6
9
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
e)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a) Do not overload the device. A correctly-selected
device will perform the task for which it was designed
better and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c) Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
d)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h) Do not move, adjust or rotate the device in the
course of work.
i)
Clean the device regularly to prevent stubborn grime
from accumulating.
j)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
k) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
l)
Keep the device away from sources of fire and heat.
m) Do not overload the scale. This can damage the load
cells.
n)
Before making a measurement, make sure that the
device is placed on a stable surface and is not exposed
to vibrations and sudden temperature changes,
which may adversely affect the measurement results.
o) Do NOT leave load on the scale for long. This will
decrease the scale’s accuracy and shorten the load
cell’s life.
p)
Do NOT use the scale in thunder or rain.
q)
Avoid extreme temperatures. Do not place the unit in
direct sunlight or near the air conditioning.
r) Do not use the scale close to large electrical
appliances such as welding machines or large
motors. Do not leave batteries in the device if you do
not use it for a long time.
s) Avoid places where moisture can lead to
condensation. Avoid direct contact with water.
t)
Do not place the unit close to windows, doors or fans
that may cause unstable results due to air currents.
u)
Keep your machine clean. Do not store products on
the scale when it is not used.
e)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
f)
Keep packaging elements and small assembly parts
in a place not available to children.
REMEMBER
When using the device, protect
children and other bystanders.
ATTENTION!
Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is intended for measuring the weight of objects
placed on the device‘s weighing platform.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
Rev. 27.06.2022
Rev. 27.06.2022
EN
EN