background image

6

7

Status indication

LED indicator flashing table

1) Fast flashing---passive arming mode

2) Slowly flashing ---armed mode

3) No flash----system disarmed

4) Turn on solid --- valet mode

5) 1 flash ... pause --- the first stage shock sensor

triggered

6) 2 flashes ... pause--- the second stage shock

sensor triggered

7) 3 flashes ... pause --- trunk/hood triggered, INST

1 / INST 2 = INST 1

8) 4 flashes ... pause ---door triggered (door (-) or

door (+))

9) 1 long flash and 3 short flashes---transponder

registration confirmed

Siren short chirps table

1) 1 chirp  --- system armed

2) 2 chirps --- system disarmed

3) 3 chirps --- system armed with door or trunk

opened.

4) 4 chirps --- warning about system triggered after

disarming

5) 5 chirps --- car searching/locating

Parking lights flashing table

1) 1 flash --- system armed

2) 2 flashes --- system disarmed

3) 3 flashes --- system armed with door, hood or

trunk opened

4) 4 flashes --- warning about system triggered

after disarming

5) 5 flashes --- car searching

Functions

1. Arming operation

To arm the system, press transmitter button  :

The siren will chirp once.

The parking lights will flash once.

The doors will be locked.

The LED will start flashing.

The system is armed with engine immobilized. LCD

transmitter will beep once and display as below:

While armed, the system will be triggered if:

The door is opened.

The trunk/hood is opened.

The ignition is turned on.

The shock sensor detects an impact.

An optional sensor is triggered.

If triggered by the door or trunk/hood input or ignition

ON, the siren will sound and the parking lights will

flash for 30 seconds.

If the shock sensor detects a light impact to the

vehicle, the system will chirp and the parking lights

will flash 5 times to warn away the potential intruder.

A heavy impact will trigger the alarm system or an

optional sensor is disturbed, the siren will chirp and

the parking lights will flash for 30 seconds.

If the door or trunk is not closed properly after arming

the system, the siren will chirp 3 times with the

parking lights flashing, and transmitter will beep 3

times with door icon flashing.

2. Passive Arming

F23-- set passive arming ON/OFF,

F24-- set door lock/unlock in passive arming

When passive arming function is on, after 30 seconds

(plus F6 arming delay time), the system will be armed

automatically if the car is parked with all the doors

closed, the sire will chirp once and the parking lights

will flash once. The LED will flash.

Note: opening the door resets the passive arming timer.

When passive arming function is on, press and hold

button  +

 twice for 2 sec in 7 seconds after the

car is parked with all doors closed, it will cancel

passive arming for one cycle. If anti-hijack is activated,

it will also be cancelled for one cycle.

Factory setting: passive arming OFF.

Note: if the ignition on or trunk is opened in 30 seconds,

the passive arming will be cancelled for one cycle.

 3. Disarming operation

To disarm the system press transmitter button 

The siren will chirp twice.

The parking lights will flash twice.

The doors will unlock.

The LCD transmitter will beep twice and display as

below:

Summary of Contents for 888W1

















Reviews: