Steelmate 888W1, User Manual

Page: 4 / 16

System operation
Button Button function
Press and hold for 2 seconds to arm in mute
mode (with siren turned off for one arm cycle)
Button function optional
Lock doors & arm the system
Unlock doors & disarm the system Stop alarm
Press and hold for 2 seconds to activate
channel CH2
Press twice to cancel the turbo timer
CH2
then CH2
CH3 Press to activate channel CH3
Arm with the 1st-stage of shock sensor
bypassed Press and hold for 2 seconds and then
press CH2 for mute arm with the first stage
of shock sensor bypassed
then CH2 then CH2
Arm with both sensors bypassed Press and hold for 2 seconds and then
press CH2 twice for mute arm with both
sensors bypassed
CH2 then Silent arming
CH2 then Silent disarming
CH2 + CH3 Press and hold for 2 seconds for panic
mode
Press both buttons in armed status for mute
arming
+ Press and hold for 2 seconds for anti-
hijack mode
+ CH2 Press and hold for 2 seconds for car
locating Press and hold for 2 seconds twice in 7
seconds to cancel passive arming for one
cycle
2-way transmitter
F (2-way transmitter) Press and hold for 5 seconds for
Time/Alarm time/W-mode setting
F and (2-way
transmitter)
Vibration on/off mode
F and CH3 (2-way
transmitter)
Turn on/off W-mode
CLOCK SETUP: CH2 = Increase, CH3= Decrease, F = Next,
Start = Beep with button press, hold F for 1 second = Exit
4 5
About LCD screen Battery indicator
Transmitter charging
Battery is full Battery is low Battery is empty.
The transmitting range
will be affected when
the battery is low.
Disarming with
door unlocked Arming in
mute mode
Parking lights
flashing
Clock alarm
Door opened
Transmitter
vibration
Signal bar Arming mode
Arming with
door locked
1st-stage shock
sensor bypass
Shock sensor
bypass
Hood-
opened Trunk -
released
Key Ignition ON Anti-hijack Valet mode
System
busy
Time/Clock
and W-function W-mode
ON
The battery status of the LCD transmitter will
be shown on the LCD display.
When the battery indicator is empty, the
transmitter needs to be charged immediately.
Charge the transmitter when the battery is low
according to the description below. The transmitter's
battery can be charged discontinuously.
Insert the charger’s plug
into transmitter’s battery
charging socket. Insert the charger into the
vehicle’s cigarette lighter socket.