background image

 

DOC:

.1.01 

 – November 9, 2006 

DL Lp 

Manufactured in Canada by Autostart

 

 

A U T O M A T I C   T R A N S M I S S I O N   R E M O T E   S T A R T E R   
 

AS-1735 

User Guide 

 
 

 
 
 

 

 

WARNING 

 

It is the responsibility of the vehicle operator to ensure 
their vehicle is parked in a safe and responsible 
manner. 

1.  When leaving the vehicle, it is the user’s 
responsibility to ensure that the gearshift lever is in 

Park

” in order to avoid accidents upon remote 

starting. 
2.  It is the user's responsibility to ensure that the 
remote starter is disabled or put into valet mode before 
servicing.

 

 

 
 

FCC USER NOTICE (U.S.A.):  

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation.  

NOTE:

 The manufacturer is not responsible for any radio or TV interference caused by 

unauthorized modifications to this equipment. Such modifications could void the user's 
authority to operate the equipment. 

Summary of Contents for AS-1735












Reviews: