1
2
Turning Glides from
Exterior of Case
Glide Adjustment
Leveling the Case
1.
Remove bottom drawer from unit if
present (refer to page 7). For 1.5-Hi
drawer/open units, the counterweight will
need to be removed in order to adjust the
rear (2) glides. Reverse steps 1 thru 4 of
page 8 of assembly instruction
939500395.
Adjust glides using a 7/32" socket driver
until the unit is level both front and back
and side to side.
2.
If it is necessary to break the glides
loose or turn them from the exterior of the
case, first unload all drawers and shelves
(refer to page 7).
With the help of an assistant, tip the unit
just enough to access the glide hex with
a 1-3/8" open-end wrench.
CAUTION: If this unit is not
ganged, counterweights may
be required. See assembly
instruction 939500204 or
939500395.
GLIDE
7/32” SOCKET
1-3/8” WRENCH
Page 9 of 27
939501617 Rev V
