Stacking Overfile Cabinets
NOTE:
Kit contains one package of four (4) Adhesive Pads.
1.
Clean surfaces with alcohol and a dry cloth first. Remove the
release liner from the adhesive pads and place four (4) on the
bottom of the cabinet as shown.
NOTE:
If desired, you may wet the top surface of the unit that is
to receive the cabinet with a damp cloth. This will delay
immediate adhesion and allow the cabinet to be aligned with the
unit below.
2.
Place the cabinet on unit below, align and let adhesive cure
for 72 hours.
CAUTION:
Be sure to align carefully because it will be very difficult to
remove and reposition.
TIP:
If the unit needs to be removed after adhesion (for
example, reconfiguration), application of heat to the adhesive
pads may aid in release.
CAUTION:
When removing and re-attaching overfile units (during
reconfiguration, for example), be sure to use brand new
adhesive pads (style number 8425960SR), available through
your Steelcase dealer.
1
2
Adhesive Pad (4)
Page 14 of 27
939501617 Rev V
