CAUTION:
If a 27" high
lateral file is to stand
alone, it must be
counterweighted.
PANEL MOUNTED WORKSURFACE
4
2
OPTIONAL
HOLES
Top View
2"
2"
12"
2"
2"
1-3/4"
1-3/4"
1.
If a 27" high lateral file case is to
be used under a panel mounted
worksurface, a tight-fitting condition
should be maintained. The cabinet
top can be secured to the underside
of the worksurface with two (2)
screws. If a tight fit between the
case and the worksurface cannot
be maintained because of an
unlevel floor, the cabinet must be
counterweighted.
2.
Remove the two (2) screws that
attach the case back to the brace.
3.
Remove top drawer and position
case under worksurface in desired
location.
4.
Mark pilot holes at 6 to 8
locations shown (2 optional).
5.
Remove case and drill pilot
holes in worksurface.
6.
Re-insert case and attach to
pilot holes with screws.
27" High Freestanding
Lateral File Installation
SCREW
Page 13 of 27
939501617 Rev V
