Steelcase
30
Preparing to use ēno
ēno stylus
LED status summary
The LED indicator on the ēno stylus provides additional status information
about Bluetooth communication with the computer.
Getting started with a projector
To set up the projector and get started using your computer from the
whiteboard:
1. Locate your projector’s video cable and connect it to the video port
of your computer.
2. Connect the other end of the video cable to your projector.
3. Connect the projector’s power cord to an outlet.
4. Turn on the projector and focus your computer screen squarely onto
your whiteboard. The projected image does not need to fill the white
area.
5. Calibrate the computer and whiteboard, as described below.
Calibrate the computer with the whiteboard
It may be necessary to calibrate the whiteboard with the computer
desktop. This assures that the location the stylus tip touches the
whiteboard exactly corresponds to the projected computer cursor and
pen.
To calibrate the ēno whiteboard with the projected host computer:
1. When the computer desktop is projected onto the whiteboard, make
sure it fits within the whiteboard frame.
2. Use the ēno stylus to tap the Calibrate icon on the ēno App icon
strip one time.
LED Condition
Blinks every three seconds
Pairing mode
Two second solid green
Connected and ready to use
Blinks quickly six times
Low battery
