Steelcase
27
Preparing to use ēno
note:
NOTE:
If you updated to ēno App version 3.0 or higher and you have an older
PolyVision Bluetooth adapter, refer to “If you use the older PolyVision
Bluetooth adapter...” on page 33.
To install the ēno receiver and pair it with the ēno stylus:
1. Turn on the host computer and assure that the ēno App version 3.0
or higher has already been installed. Refer to “Install the ēno App” on
page 22.
2. Assure that the ēno receiver is connected to a USB port on the host
computer.
note:
NOTE:
For the best signal reception, make sure that no obstacles are present
between the stylus and ēno receiver during normal use. Optionally,
connect the USB extender cable (provided) to the computer and ēno
receiver to help you assure optimum exposure of the ēno receiver.
newer ēno receiver
older PolyVision Bluetooth adapter
