Steelcase
28
Preparing to use ēno
3. Turn on the ēno stylus by removing the cap.
4. Wait for the stylus LED to blink green once every three seconds.
Refer to “ēno stylus LED status summary” on page 30 for additional
stylus LED signals.
5. Press and release the button on the ēno receiver to pair the
Bluetooth signal with the stylus.
While the ēno receiver searches for the ēno stylus Bluetooth
signal
, a status message appears on the computer screen and the
LED on the ēno receiver flashes green.
After pairing is successful
(within 30 seconds), the status message
on the computer screen indicates that ēno is ready to use and the
ēno receiver LED changes to a solid blue color.
If pairing is not successful,
a status message appears on the
computer screen.
Troubleshooting
: If pairing was not successful, you can try to
resolve the problem by removing the ēno receiver from the USB
port, waiting five seconds, and reinserting it before attempting the
pairing process again.
