I N S T A L L A T I O N
Installation – step 3
Compressed air installation
Compressed air specification& quality:
Water supply pressure: 87 to 100PSI [6 to 7bar]
Air supply should be clean, dry and free from oil.
In case dirt or oil is contained in air supply, an air filter and oil separator should be installed.
Any oil collector should be connected to an oil drain.
To prevent bacterial growth, compressed air piping should be non-corrosive and any join ng
material should be inorganic.
Figure 7 Compressed air installa on
Compressed air connection:
6. Install a manual shut off valve on the compressed air line.
7. Install an air filter and oil separator on the line. This filter will protect ACA internal
component and avoid spraying oil in the air.
8. Connect compressed air to the universal quick coupling M type 1/4 connec on.
located at the bo om of ACA distribu on panel and secure the compressed air line.
9. Ensure that the compressed air line is leak free.
15
Air filter & oil separator (by others)